|
|
|
|
Safety product groups
 |
 |
Stepped monitoring in accordance with risk, demand and budget |
|
|
From a sleeping sensor to real-time monitoring
The OSMOS safety system can be adapted flexibly to safety and financial requirements through a use of different safety concepts. Monitoring can be performed at various levels in accordance with the risks involved and available budget: |
|
|
|
One possibility, in the case of new buildings and existing structures, is the installation of an X-Trigger which supplies a yes/no decision without the need for additional cabling. |
|
|
|
The sleeping mode is intended mainly for use at low risk levels – especially in the case of new buildings; here, the sensor is installed without a direct, permanent connection to a monitoring station. Following a reference measurement, the sensor assumes a sleeping mode in which it can be used to detect changes in the length of the enclosing structure. On-site measurements can be performed following establishment of a connection to the monitoring station whenever required. |
|
|
|
Continuous measurement via a connection to a monitoring station is possible with and without remote queries. The objective here is permanent, real-time monitoring. Data acquisition and analysis also take place in real time. The system operates continuously to permit constant monitoring.
|
|
